Alat Peraga Pendidikan Otomotif | Mesin Computer Controlled Pipe Network Unit

Alat Peraga Pendidikan Otomotif | Mesin Computer Controlled Pipe Network Unit, with Hydraulics Bench (FME00)

Descriptions
The EDIBON Pipe Network Unit has been designed for enabling different pipe network installations, measuring the flow and pressure, always using water as test fluid.
The objective of this unit is to simulate the problems that could be originated in pipe networks, having this pipes different lengths and diameters, as it happens in the cities.
With these studies, the dimensions of the networks will be clearer, in order to obtain the flow and pressure necessary for them.
A typical case is, for instance, a water distribution network in a town. Predictions of pressure and flow and their variations that take place in a network are of great interest, because, with these data, the pipe types required for such network could be determined with more accuracy.
This Computer Controlled Unit is supplied with the EDIBON Computer Control System (SCADA), including: Control Interface Box + Data Acquisition Board + Computer Control and Data Acquisition Software, for controlling the process and the parameters involved.


Specifications
AMTC. Unit:
Anodized aluminium structure and panels in painted steel (epoxy paint).
Main metallic elements in stainless steel.
Diagram in the front panel with similar distribution to the elements in the real unit.
Pipe network.
Lateral panel where all test elements are located.

Test pipes:
Aluminium pipe, 16 mm outer diameter.
PVC pipe, 25 mm outer diameter.
PVC pipe, 16 mm outer diameter.
PVC pipe, 20 mm outer diameter.
Methacrylate pipe, 16 mm outer diameter.

Test Connections:
Connection of 4 pipes with drain or outlet valve.
Connection of 3 pipes
Straight connection of a pipe with outlet valve.
Pipe connection with outlet pipe in the shape of a siphon.
Connection of 2 pipes with outlet valve. (3 units).
Connection of 2 pipes with pressure taking.
Connection of 2 pipes without pressure taking.
2 Differential Pressure sensors, range: 0-1000 mm (0.5 accuracy).
2 Pressure sensors, range: 0-2 bar.
Pressure takings in the test elements.
Flow sensor, range: 0-80 l./min.
Valves for distributing the flow to the network.

Hydraulics Bench (FME00):
Mobile Hydraulics Bench, made in polyester reinforced with fibreglass, and mounted on wheels for mobility.
Centrifugal pump, computer controlled, 0.37 KW, 30-80 l/min at 20.1-12.8 m., single phase 220V./ 50 Hz or 110V./60 Hz.
Runner made in stainless steel.
Sump tank capacity: 165 litres.
Small channel: 8 litres.
Flow measurement: volumetric tank, gauged from 0 to 7 litres for low flow values and from 0 to 40 litres for high flow values.
Level tube with a scale that shows the water level in the upper tank.
Flow stilling baffle for reducing the turbulence rate.
Control valve for regulating the flow.
Remote hand-operating dump valve in the base of the volumetric tank.
Safety switch and contact light.
Manufactured with corrosion resistant materials ensuring a long life of the unit.

AMTC/CIB. Control Interface Box:
Control interface box with process diagram in the front panel and with the same distribution that the different elements located in the unit, for an easy understanding by the student.
All sensors, with their respective signals, are properly manipulated from -10V. to +10V computer output.
Sensors connectors inthe interface have different pines numbers (from 2 to 16), to avoid connection errors.
Single cable between the control interface box and computer.
The unit control elements are permanently computer controlled, without necessity of changes or connections during the whole process test procedure.
Simultaneously visualization in the computer of all parameters involved in the process.
Calibration of all sensors involved in the process.
Real time curves representation about system responses.
Storage of all the process data and results in a file.
Graphic representation, in real time, of all the process/system responses.
All the actuators’ values can be changed at any time from the keyboard allowing the analysis about curves and responses of the whole process.
All the actuators and sensors values and their responses are placed in only one computer screen.
Shield and filtered signals to avoid external interferences.
Real time computer control with flexibility of modifications from the computer keyboard of the parameters, at any moment during the process.
Real time computer control for pumps, compressors, resistances, control valves,etc.
Open control allowing modifications, at any time and in a real time , of parameters involved in the process simultaneously.
Three safety levels, one mechanical in the unit, other electronic in control interface and the third one in the controlsoftware.

Tweet