Alat Peraga Pendidikan Teknik Mesin | Peralatan Turning | Cnc lathe turning - COMPAC-AP300T
Alat Peraga Pendidikan Teknik Mesin | Peralatan Turning | Cnc lathe turning - COMPAC-AP300T
COMPAC-300T was designed to:
• Meet the actual demands of qualified industrial Education for CNC-Standard
• Utilized based on a sophisticated machine tool concept at high Industrial Standard with most modern control system Siemens 802C for training in Din-Code and Conversational Programming
• Offer optional specialized PC-Based software applications for basic training and programming to be used for qualified education of students.
COMPAC-300T Mechanical Specifications
Basic functions
• Swing over bed : 200mm
• Cross travel, Stroke X : 140mm
• Longitudinal travel, Stroke Z : 320mm
• Distance between centers : 480mm
• Resolution : 0.005mm
• Rapid feed : 3m / min
• Headstock
• Power : 2.2 KW
• Speed range : 100 - 3000rpm
• Chuck diameter : 160mm
• Turret
• Tool holder system : VDI
• Number of Tools : 8
• CNC control
• Controller (Servo Motor) : Siemens 802C (DEFAULT); Fanuc upon request
• Interface : RS 232
• No. of controlled axis : 2
• Screen : Monochrome
• I/O Module : 48/16 DI/O
• Safety devices
• Enclosed working area : Yes
• Door limit switch : Yes
• General Specs
• Floor space L x W x H : Approx. 1600 x 1000 x 1500 mm
• Weight : 900kg
• Power supply : 380V, 3ph, 50Hz CNC Controller Modes, Siemens 802C
• Set-Up : Entering Tools and Tools Offsets, Creating A New Tools, Tools Compensation Data, Entering Modifying and Determining Zero Offset and R Parameter.
• Manual Operated Mode : Jog Mode, Hand wheel and MDA (Manual Data Input).
• Automatic Mode : Selecting/Starting Part program, Block search, Stop / Abort Part program and Repositioning after interruption.
• Part Programming : Enter/Edit New program, Programming Support, Vertical menu, Cycles, Contour and User Assignable Soft keys.
• Services and Diagnosis : Data Transfer Via V24 Interface, Interface Parameters, Special Functions, Diagnosis and Start-Up.
• Programming : Program Structure, Word structure and Block structure and Character Set.
• Cycles : refer to Controller Features.
• Pocket Calculator : To calculate the required value and can use the four basic arithmetic operations and functions Sine, Cosine, Squaring as well as square root function
1. Off – Line Simulation /Programming system (Optional)
2. CNC simulation system TopTURN and TopCAM
3. MDI machine setup
4. Off line program / cutting verification
5. Machining quality control system
6. Machining analysis
7. 3-D simulation
8. DNC transmission
0 Response to "Alat Peraga Pendidikan Teknik Mesin | Peralatan Turning | Cnc lathe turning - COMPAC-AP300T"
Posting Komentar